Ablesan is a spray-on-leave on sanitiser concentrate based on stabilised hydrogen peroxide that is known to kill 99.99% of germs and bugs

Ideal for general surface sanitisation in all homes and workplaces including food areas via sprayer, fogger or soak application.

Dilute to 10% with potable water on most surfaces that are not harmed by water alone. Discard made up solutions within 14 Days of diluting. Store product in original container in an upright position, in a cool environment out of direct sunlight. 

*Tip to efficiently treat large areas with the 10% Solution of Ablesan such as offices, vehicle cabins, or common work areas use airless paint sprayers, fogger unit or pump up type weed sprayers. Trigger sprays are in short supply and are slow going. 

ACETONE is a pharmaceutical grade100% acetone solvent which is ideal in many industries as a cleaner and sanitiser. ACETONE can be used to remove nail polishes, adhesives, scuff marks on floors, permanent marker stains, ink stains on clothing. It also dissolves superglue, removes melted plastic and sticker gunk from glass & metals.

Alcohol 70% is commonly used as leave on sanitizer for hard surfaces and hands. Contains 70% denatured ethanol.

For use in clean conditions and on clean dry skin. Use as received and apply liberally via swab, spray or soak method and allow to air dry to afford sanitizer to work.

FOAMSAN is a specialized cleaner sanitizer designed for the removal of animal fats, starches, oils and grease from floors, walls, evaporators, heating coils, cooling cools, processing equipment and lines in food processing areas. 

ISOPROPYL ALCOHOL (IPA) is >99.99% pure and is one of the most useful cleaning aids you can have around. It is widely used as a sanitiser, general solvent and cleaner.

NO LONGER MADE - REPLACED WITH "IPA 75%" AS PER WHO RECOMMENDATION 

LIQUID BLEACH 4% is a chlorinated cleaning, sanitizing and de-staining compound.
The product removes stains, whitens clothes, kills bacteria and de-odorizes.

MARINER is an industrial strength degreaser, cleaner and disinfectant for use in both the Maritime and Food Processing Industries.

OXY 5 is 5% Hydrogen Peroxide (H2O2). This product is a food grade sanitizer / sterilizer commonly used in commercial laundries as a colour safe bleach and sanitizer, in hospitality as a no rinse beerline and general sanitiser, in laboratories as a general steriliser and in other institutional and industrial applications. Oxy 5 is completely safe when used according to instructions and breaks down to harmless oxygen and water.

OXY 50 is 50% Hydrogen Peroxide (H2O2) is a strong oxidizing agent used in aqueous solution as a commercial bleach, and surface sanitising agent. Ideal for cleaning stains from almost any colour fast surface once diluted.

PEROXY ACETIC ACID (Peracetic acid (C2H4O3)) is a mixture of acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in solution which finds widespread use a cost effective NO RINSE sanitising solution in breweries, dairy farms, food processing & commercial laundries.

Q-SAN - Spray-On-Leave-On Sanitizer Concentrate is formulated for the daily use as an “end-of-shift” general purpose leave-on-sanitizer for use within all food service industry groups and is also suitable for commercial and domestic use. Q-SAN’s active ingredient is a quaternary ammonium compound which kills a broad spectrum of germs and bacteria. The product leaves behind an invisible Quat-polymer protective film that helps to keep surfaces germ free for up to 24 hours.

FOOD AREA USE: Concentrations are regulated; use Q-SAN at rate of 50 ml per litre (5% v/v) of water via mister or trigger spray. After 5 minutes of contact time between Q-SAN and the surface the surface will then be considered as being “sanitised” and no further surface preparation is generally required. Hard, non-porous food contact surfaces, such as equipment and utensils, may be used following sanitation without a potable water rinse provided that Q-SAN is used at 5%v/v strictly according to directions, and the surfaces are drained and dry prior to any food contact. When used in FOOD AREAS it is recommended to discard diluted solutions after each day and make fresh solution daily.

NON FOOD AREAS such as commercial and domestic use: For a high level of sanitation apply Q-SAN at rate 50 ml per litre (5%v/v) with potable water via trigger spray to a pre-cleaned surface. For low risk areas use as little as 1 part to 200 parts of water for a kill of 99.9% of germs and bugs within 1 minute.   Allow the wetted surface to air dry or wipe dry with clean cloth. The surface will be considered sanitised after 1 minute. For domestic & commercial use there is no requirement to discard made-up solutions but we recommend unused solutions be discarded after 3 months when stored as per Section 7 of the SDS.

Q-SAN is non-hazardous according to NOHSC criteria.
Avoid unnecessary contact with skin and eyes. Do not drink.

QUAKE 160 is peracetic acid (C2H4O3)) is a mixture of acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in solution which finds widespread use and is a cost effective NO RINSE sanitising solution in breweries, dairy farms, food processing & commercial laundries. QUAKE 160 is also excellent at removing the green coloured vanadium stains from bricks and pavers when mixed with equal parts water and applied for 2-5 minutes then washed off. 

QUAT is a highly concentrated AQIS compliant sanitiser formulated for the food processing industry.

SODIUM HYPOCHLORITE 12.5% is a commercial bleach used to remove stains, whiten, kill germs and deoderise. It can be used in all areas of the home and finds many uses in all industries.

TRISOL is a AQIS compliant combined bactericide and cleaner ideal for all disinfecting, bacteria control, de-staining and deodorising operations in breweries, food industry, industrial, toilets and washrooms etc.

WESTGUARD is an AQIS compliant food area cleaner sanitser for killing 99.9% of germs and bugs.