Typically used as a tracer dye in industrial, drilling and plumbing applications to locate leaks.

Use Recommendations

Use 1L of dye per 1000L of MEG: DI mixture to yield 32 ppm of dye.

Safety Phrase

Refer Label, TDS or SDS

The post DYE RED RAVICOL appeared first on Able Westchem.

Designed to prevent the formation of sludge in tanks, filters, preheaters, and other fuel system components on steam and motor vessels using heavy fuel oils.

Simply add the product directly from the container into the fuel bunker tank before or during filling. It disperses easily with the fuel, ensuring even distribution. For controlled dosing, a metering pump such as the uniservice metering pump can be used to administer the product into the fuel bunker tank.

Use Recommendations

As a general guideline, the initial recommended dosage is 1L of ABLE FOT DUAL PURPOSE for every 4000L of heavy fuel oil. In cases where fuels exhibit high sulphur and vanadium content, or if there is high viscosity or solid contents, dosage quantities of 1L to 2L for every 2000L of fuel oil may be necessary.

Safety Phrase

Refer Label, TDS or SDS

The post ABLE FOT DUAL PURPOSE appeared first on Able Westchem.

• Oilfield production and injection wells.
• Reverse osmosis (RO) and membrane systems.
• Brine reinjection and disposal systems.
• Mining and geothermal water handling.

Use Recommendations

SCALEGUARD 3100XF is effective at very low concentrations – seek technical advice. Recommendations are based with out knowledge of individual water contaminates, actual dose should be confirmed via jar testing or scale prediction modelling based on system water chemistry.

Safety Phrase

Refer Label, TDS or SDS

The post SCALEGUARD 3100XF appeared first on Able Westchem.

Typically used as a tracer dye in industrial, drilling and plumbing applications to locate leaks.

Use Recommendations

Use 1L of dye per 1000L of MEG: DI mixture to yield 32 ppm of dye.

Safety Phrase

Refer Label, TDS or SDS

The post FLUORESCEIN YELLOW DYE appeared first on Able Westchem.

THIS PRODUCT DOES NOT FOAM and is a testing fluid only

FIRE FIGHTING TESTING FLUID MV is usable for simulation at Low, Medium and High Expansion across most types of testing & training situations involving Class A & B fires.

Use Recommendations

Use as received diluted into either tap water, sea water or brackish water at concentrations between 2% to 4%.

Safety Phrase

Refer Label, TDS or SDS

The post FIRE FIGHTING TESTING FLUID MV appeared first on Able Westchem.

• Industrial use only, not for domestic applications.
• Oil field and petrochemical operations – for use in fluids for drilling and stimulation of oil and gas wells, injection water, water holding tanks, disposal-well water, recirculating-water handling systems, and pipelines.
• Controlling slimes, odours, moulds and biological growth in cutting fluids and processing aids.
• Heat-transfer systems and industrial and commercial cooling and wastewater systems.
• As an additive in paints and antifoulants for control of mildew, mould and fungus.
• An effective bilge treatment to control marine plant and animal life such as algae, hydroids and barnacles.
• Emulsion and solution preservation – for the preservation of solutions, emulsions, adhesives, and other aqueous liquid products that do not come into contact with food.

Use Recommendations

BIOCIDE THPS is effective at very low concentrations – seek technical advice. Recommendations are based with out knowledge of individual water contaminates.

Safety Phrase

Refer Label, TDS or SDS

The post BIOCIDE THPS 25 appeared first on Able Westchem.

Solution is ready to use so no furtehr dilution is required.

Use Recommendations

ABLETHERM SR-1 FLUID 30 RTU can be used in closed loop, water-based HVAC, Process heating and cooling, water-based HVAC, food industry applications within temperature range. Substitute for Dowtherm.

Safety Phrase

Refer Label, TDS or SDS

The post Abletherm SR-1 Fluid 30 RTU appeared first on Able Westchem.