Typical Applications

• Industrial and process-water microbial control
• Cooling-water systems and storage tanks
• Oil and gas injection water, produced water and pipeline treatment
• Hydraulic-fracturing fluid preservation
• Pulp and paper slime and biofilm control
• Preservation of water-based paints, adhesives, detergents and industrial formulations
• Leather pre-tanning and chromium-free tanning processes
• Industrial, institutional and veterinary disinfectant formulations
• Laboratory tissue fixation and protein cross-linking

Key Benefits

• Rapid, broad-spectrum antimicrobial performance
• Helps control bacteria, fungi, viruses and biofilm
• Supports protection against microbiologically influenced corrosion
• Water-soluble and suitable for controlled dosing systems
• Effective across a range of industrial operating conditions
• Versatile concentrated active for specialised formulations

Glutaraldehyde Solution 50% is a highly hazardous industrial concentrate classified as Class 8 Dangerous Goods with a Division 6.1 toxic sub-risk. Use only in properly engineered systems and in accordance with the Safety Data Sheet, technical advice and all applicable product-registration requirements.

Use Recommendations

Use as per technical advice specific to industry only.

Safety Phrase

Refer Label, TDS or SDS

The post GLUTARALDEHYDE SOLUTION 50% appeared first on Able Westchem.

Use Recommendations

Use as per technical advice specific to industry advice only.

Safety Phrase

Refer Label, TDS or SDS

The post SODIUM CHLORITE 25% appeared first on Able Westchem.

• Industrial use only, not for domestic applications.
• Processing Plants – mist disinfection is recommended after a thorough clean and rinse. DDAC should be diluted at 0.5%v/v with potable water for use as a disinfectant. Apply via a mister or spray pack at a rate of ~12L per 1000m3 and allow to air dry.
• Poultry Water Lines – Between each batch cycle disinfect the drink lines with a 1:500 dilution (200ml in 100 litres). Leave on for an hour and then purge the lines.
• Washing of Poultry Sheds & Equipment.
• Fogging Live Birds.

Use Recommendations

DDAC 12% is effective at very low concentrations – seek technical advice. Recommendations are based with out knowledge of individual equipment or contaminates.

Safety Phrase

Refer Label, TDS or SDS

The post DDAC 12% appeared first on Able Westchem.

Use Recommendations

Use as per technical advice specific to industry only.

Safety Phrase

Refer Label, TDS or SDS

The post DBNPA 20 appeared first on Able Westchem.

• Industrial use only, not for domestic applications.
• Oil field and petrochemical operations – for use in fluids for drilling and stimulation of oil and gas wells, injection water, water holding tanks, disposal-well water, recirculating-water handling systems, and pipelines.
• Controlling slimes, odours, moulds and biological growth in cutting fluids and processing aids.
• Heat-transfer systems and industrial and commercial cooling and wastewater systems.
• As an additive in paints and antifoulants for control of mildew, mould and fungus.
• An effective bilge treatment to control marine plant and animal life such as algae, hydroids and barnacles.
• Emulsion and solution preservation – for the preservation of solutions, emulsions, adhesives, and other aqueous liquid products that do not come into contact with food.

Use Recommendations

BIOCIDE THPS is effective at very low concentrations – seek technical advice. Recommendations are based with out knowledge of individual water contaminates.

Safety Phrase

Refer Label, TDS or SDS

The post BIOCIDE THPS 25 appeared first on Able Westchem.

Active ingredients are bromo-chloro-dimethyI- hydantoin (BCDMH), CAS # 16079-88-2.

Easy to use, BCDMH Tablets are effective at low concentrations, an outstanding source of bromine and offer OH&S benefits over liquid form of chlorine.

Dosage: amount used is dependent on many factors such as the amount of fouling and type of system, as a guide:

Shock Dose: up to 36 tabs to every 10,000L to reach 1ppm.

Ongoing: 6-18 tabs to every 10,000L to reach 1ppm.

Use Recommendations

• Air conditioning condensates.
• Brewery and food pasteurisers.
• Cooling Towers.
• Heat exchange systems.
• Lagoons.

Safety Phrase

The post BCDMH BIOCIDE TABLETS appeared first on Able Westchem.

Use Recommendations

Product contains ~23% Bromine & ~10.2% Chlorine at the time of manufacture.

BENEFITS & TIPS

• CONTAINS CHLORINE 10%
• CONTAINS BROMINE 23%
• BIOCIDE / ANTIMICROBIAL AGENT
• LONG SHELF LIFE
• SUITABLE FOR VARIOUS APPLICATIONS

Safety Phrase

Refer Label, TDS or SDS

The post STB70- Bromax 10.2/B23 appeared first on Able Westchem.

Biocide BS is a versatile product ideal for:

• Controlling slimes, odours, moulds and biological growth in cutting fluids and processing aids.
• As an additive in paints and antifoulants for control of mildew, mould and fungus.
• An effective bilge treatment to control marine plant and animal life such as algae, hydroids and barnacles.

Use Recommendations

BIOCIDE BS is effective at very low concentrations of 12 ppm active ingredient in the control of algae, bacteria and fungi. Recommendations are based with out knowledge of individual water contaminates.

Slug Dosing Recommendations:

When the system is noticeably fouled:

1. 20 to 70ppm for every 4000 Litres.
2. Repeat until microbial control.

Intermittent Maintenance Dosing Recommendations:

1. After establishing microbial control: 13.5 to 80 ppm.
2. Dose 2 to 3 times per week based on microbial control.
3. Sulphate Reducing Bacteria control between 45 to 85 ppm.

Safety Phrase

Refer Label, TDS or SDS

The post Biocide BS appeared first on Able Westchem.

Use Recommendations

FUELTREAT BIOCIDE is designed to cause inhibition of microbial growth upon contact and quickly result in cell death. The exact time to kill all microbes in a fuel will vary but will typically be between 8 and 36 hours. FUELTREAT BIOCIDE is effective in systems containing both fuel and water. Unlike other fuel treatment biocides, the active ingredients in FUELTREAT BIOCIDE are not deactivated by water. Uses as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

The post Fueltreat Biocide appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Oxy 50 – Hydrogen Peroxide 50% Soln – Food Grade appeared first on Able Westchem.