Use Recommendations

ACID DETERGENT AC580 may be used neat, or diluted with up to 10 parts of water. We recommend a dilution rate of 1 part of ACID DETERGENT AC580 to 5 parts of water initially; this solution can be diluted further or strengthened according to the extent of the contamination. Swab surface, working from the bottom upwards and keep wet evenly until clean. Flush with fresh water. Ensure that the surface is uniformly covered as uneven application may produce streaking.

Safety Phrase

Refer Label, TDS or SDS

Can this product remove red dust stains from paintwork on my vehicle?

Yes, AC580 can remove red dust stains safely from vehicle paintwork.

Red dust has stained the inside of my vehicles; can you use the acid detergent on carpets and plastic in the interior?

Yes, AC580 can be used on the inside of cars to remove red dust stains (we suggest starting with a very weak concentration and doing a test patch). Consult your reseller for more details.

What sort of damage can the Hydrofluoric Acid do to me at the concentration?

This product should be handled with care, especially when decanting. It contains less than 1% of HF which is only at an irritant level, however there are other acids in the product too that can cause burns if handled incorrectly.

The post Acid Detergent – AC580 appeared first on Able Westchem.

Use Recommendations

LIQUISEAL it is a safe and simple, puncture resistant sealant solution, used to combat the intrusion of such sharp and penetrating objects such as broken glass, nails, screws, metal objects, thereby eliminating the loss of tyre pressure through porous tyre casings, leaking valves, getting a slow puncture, or complete tyre deflation.

Use as received. The LIQUISEAL is first pumped into the tyre’s air cavity through its normal air inflation valve (often after removing the core or spraying it into the tire), where once all the air in that cavity has been replaced (Void-Free) by the tyre filling compound, is then taken up to the tyre’s recommended operating pressure.

When the liquid tyre filling compound is in a solid state, under the normal operating life of that tyre it will provide resistance to leaks, flats, sidewall damage and intrusions for a number of years.

• Very Small: Bicycles, Golf Carts, Wheelchairs, Ride on mowers = 125ml-250ml
• Small to Medium: Cars, Caravans, Trailer tyres = 500ml
• Large: 4wds tyres = 750ml
• Oversize: Trucks, Vans = 1,000ml +
• Calculation: Height of Tyre (cms) x Width of Tyre (cm) x 0.50 = Amount required in mls

Safety Phrase

Refer Label, TDS or SDS

The post Liquiseal – Tyre Puncture Sealer appeared first on Able Westchem.

Use Recommendations

For best results the surface to be treated should be clean and dry. Apply SUPER SHINE via a spray bottle onto the surface. A gentle buff on vinyl surfaces may be required to give a homogeneous finish.

Ensure application of SUPER SHINE is done with the spray directed away from the face. It is a good practice to work in open spaces with good ventilation. Do not atomise the spray.

Safety Phrase

Refer Label, TDS or SDS

The post Super Shine – Tyre & Internal Shine appeared first on Able Westchem.

Use Recommendations

Apply liberally to bead area of tyre. Install tyre to rim and inflate. Collect excess TYRE LUBE and return to container.

For truck tyres, install tyre to rim, then re-apply TYRE LUBE between the bead and rim to form a seal to aid in inflating.

This product may be diluted 1:3 with warm water to extend usage rates.

Safety Phrase

Refer Label, TDS or SDS

The post Tyre Lube – Mounting Concentrate appeared first on Able Westchem.

Use Recommendations

For best results the surface to be treated should be clean and dry. Apply neat or diluted Tyre Gloss via a spray bottle onto the surface. A gentle buff may be required to give a homogeneous finish.

Tyre Gloss provides a temporary gloss on most tyres for 2-7 days. For situations where silicone can be used and a longer lasting gloss is required, please see our product: SUPER SHINE.

Safety Phrase

Refer Label, TDS or SDS

The post Tyre Gloss – Silicone Free Tyre & Internal Shine appeared first on Able Westchem.

Use Recommendations

For the best results application surfaces should be cleaned before applying. TYRE & TRIM BALM can be applied to wet and dry surfaces. TYRE & TRIM BALM is not a permanent paint or treatment.

Safety Phrase

Refer Label, TDS or SDS

The post Tyre & Trim Balm appeared first on Able Westchem.