Corrosion Inhibitors | Order Corrosion Inhibitors in Bulk

SODIUM HEXAMETAPHOSPHATE 40%

Able Westchem — Mon, 20 Jul 2026 06:40:03 +0000

SODIUM HEXAMETAPHOSPHATE 40% SOLUTION also known a Calgon liquid, is a highly water-soluble polyphosphate used as a versatile sequestrant, emulsifier, and thickening agent.

Used for fertilizers, laboratory chemicals, binding agent, complexing agent, corrosion inhibitors, anti-scaling agents, food /feed additives, pH regulating agent, Softeners, Stabilizers.

Use Recommendations

Use as per technical advice specific to industry advice only.

Safety Phrase

Refer Label, TDS or SDS

The post SODIUM HEXAMETAPHOSPHATE 40% appeared first on Able Westchem.

SODIUM THIOSULPHATE 30%

Able Westchem — Wed, 17 Jun 2026 07:04:36 +0000

SODIUM THIOSULPHATE 30% SOLUTION has many Industrial usages such as but not limited to; Oxygen Scavenger, Dichlorination, Corrosion Inhibitor and drilling mud stabilizer..

Use Recommendations

Use as per technical advice specific to industry advice only.

Safety Phrase

Refer Label, TDS or SDS

The post SODIUM THIOSULPHATE 30% appeared first on Able Westchem.

SODIUM HEXAMETAPHOSPHATE 20%

Able Westchem — Thu, 30 Apr 2026 06:31:38 +0000

SODIUM HEXAMETAPHOSPHATE 20% W/W SOLUTION is a highly water-soluble polyphosphate used as a versatile sequestrant, emulsifier, and thickening agent.

Used for fertilizers, laboratory chemicals, binding agent, complexing agent, corrosion inhibitors, anti-scaling agents, food /feed additives, pH regulating agent, Softeners, Stabilizers.

Use Recommendations

Use as per technical advice specific to industry advice only.

Safety Phrase

Refer Label, TDS or SDS

The post SODIUM HEXAMETAPHOSPHATE 20% appeared first on Able Westchem.

SCALEGUARD 3100XF

Able Westchem — Thu, 26 Mar 2026 05:47:40 +0000

SCALEGUARD 3100XF is a Broad-Spectrum Antiscalant – Non-Flammable. ScaleGuard 3100XF liquid Antiscalant formulation specifically designed to prevent deposition of calcium, barium, and strontium scales in high-TDS, hightemperature brine systems. It combines synergistic phosphonates with dual polymer inhibition, offering superior protection without flammability risk.

Oilfield production and injection wells.
Reverse osmosis (RO) and membrane systems.
Brine reinjection and disposal systems.
Mining and geothermal water handling.

Use Recommendations

SCALEGUARD 3100XF is effective at very low concentrations – seek technical advice. Recommendations are based with out knowledge of individual water contaminates, actual dose should be confirmed via jar testing or scale prediction modelling based on system water chemistry.

Safety Phrase

Refer Label, TDS or SDS

The post SCALEGUARD 3100XF appeared first on Able Westchem.

Pink Spray – Battery Acid Neutraliser

Able Westchem — Wed, 29 May 2024 01:31:51 +0000

Pink Spray & Battery Acid Neutraliser. Safety and efficiently clean and neutralize battery terminal corrosion with confidence of inbuilt indicator. Also, safely and confidently neutralize spilt or spent sulphuric acid. Aside from being unsafe and acidic, corrosion on battery terminals is a common cause of reduced battery life and electrical problems in vehicles. Simply spray a liberal amount on the corrosion until the solution on one terminal at a time turns from pink to clear. Once solution remains pink then the acid has been fully neutralized. Wipe area clean with rag and repeat on other terminals. Take care not to over spray and link the terminals with the product as shorting may occur. For spilt or spent battery acid you can use pink liquid to neutralize your acid or to test if your acid has been neutralized.

The post Pink Spray – Battery Acid Neutraliser appeared first on Able Westchem.

Ablefrost HD

Able Westchem — Wed, 03 Aug 2022 05:27:15 +0000

ABLEFROST HD is an inhibited Propylene glycol-based heat transfer fluid. ABLEFROST HD is a formulation of 96% propylene glycol and a specially designed corrosion inhibitor package. The fluid is dyed pink to aid in leak detection. Solutions in water provide freeze protection to below -50°C (-60°F) and burst protection to below -73°C (-100°F).

Use Recommendations

ABLEFROST HD is recommended to use in the temperature range -45°C (-50°F) to 160°C (325°F).

ABLEFROST HD is suitable in the single fluid process heating and cooling, closed loop, water-based HVAC applications where propylene glycol containing fluids are required or recommended such as food processing establishments.

ABLEFROST HD is ideal for the following applications:

Food and drink processing – abattoirs, breweries, drinks, general food
Pharmaceutical
Ai data and computing centres
Geothermal exchange applications
Industrial applications where Propylene Glycol is preferred

Safety Phrase

Refer Label, TDS or SDS

The post Ablefrost HD appeared first on Able Westchem.

Able Inox Gel – Pickling Gel

Able Westchem — Wed, 13 Oct 2021 12:42:02 +0000

ABLE INOX GEL is fast acting, maximum strength stainless steel pickling gel suitable for passivating and weld cleaning on most grades of Stainless Steel (SS316, SS304 etc.) without the need for a Poisons License. Contains an anti-gassing agent for your added safety. NO LICENCE REQUIRED

Use Recommendations

Use as received and do not dilute or mix with other chemicals. The pickling process should take between 30 to 90 minutes depending on temperature & surface to be treated. Application should ideally be performed indoors in well ventilated area at room temperature. For outdoor work, the stainless steel to be pickled must be shielded from direct sunlight and rain. To use simply apply a thin to medium film with an acid resistant brush (ideally) or with a roller with splash guard (not as safe as brush method because of splatter). Coverage is approximately 120 meters of weld length per 1L or 6m2per litre of gel. Once applied the pickling gel will usually work within 60 – 240 minutes. The pickling time varies according to the prevailing temperature, type of steel and weld. Many boilermakers apply and leave over night to work. Only apply the pickling gel to surfaces that are free of oil or other contamination and if working temperature is between +3 to +40ºC (product can “gas off” in high temperatures, conversely in low temperature the chemical reaction can be slowed or stopped). Once the product has worked the surface should be triple rinsed using copious amounts of high pressure water.

Safety Phrase

Refer Label, TDS or SDS

The post Able Inox Gel – Pickling Gel appeared first on Able Westchem.

AFAB 50 – HD Coolant Diesel & Petrol

Able Westchem — Wed, 13 Oct 2021 12:41:56 +0000

AFAB 50 is a green coloured, premium performance, low silicate, ethylene glycol based coolant, antifreeze and corrosion inhibitor for use in all automotive cooling systems such as those in passenger cars, trucks, busses and equipment.

Use Recommendations

Use as received in clean and good condition cooling systems. Flush system as per manufactures instructions first.

Safety Phrase

Refer Label, TDS or SDS

The post AFAB 50 – HD Coolant Diesel & Petrol appeared first on Able Westchem.

Aqua Guard Radiator Inhibitor

Able Westchem — Wed, 13 Oct 2021 12:41:53 +0000

AQUA GUARD RADIATOR INHIBITOR is a green coloured corrosion inhibitor concentrate designed to produce an economical corrosion inhibited coolant when added to soft or demineralised water.

Use Recommendations

Use to provide adequate protection for cast iron engines whose fluids dropped and replaced annually. This product meets the requirements of AS2108.1:2004 Type B and when mixed according to directions will provide adequate protection for 12 months or 50,000 km under standard Australian road going conditions. Please note that this product should not be mixed with AS2108.1:2004 Type A coolants and this product has no effect on freezing or boiling point of a cooling system (ie not AF or AB) and for this reason this product is not recommended for freezing conditions or high performance applications.

Safety Phrase

Refer Label, TDS or SDS

The post Aqua Guard Radiator Inhibitor appeared first on Able Westchem.

Aqua Guard Corrosion Inhibitor

Able Westchem — Wed, 13 Oct 2021 12:41:53 +0000

AQUA GUARD CORROSION INHIBITOR is a water based immersion or contact inhibitor for the temporary corrosion inhibiting of both FERROUS & NON FERROUS metals.

Use Recommendations

AQUA GUARD CORROSION INHIBITOR is a concentrate and should be diluted before use. This product is completely miscible with water and does not phase out with extreme fluctuations of temperature.

The recommended dilution is 50mls of product made up to 950mls with clean soft water. In immersion tanks use above recommended dilution.

Safety Phrase

Refer Label, TDS or SDS

The post Aqua Guard Corrosion Inhibitor appeared first on Able Westchem.

Corrogard Concentrate – Corrosion Inhibitor

Able Westchem — Wed, 13 Oct 2021 12:41:32 +0000

CORROGARD is a corrosion inhibitor concentrate containing Nitrites & Nitrates; compatible with mono ethylene glycol (MEG) and mono propylene glycol (MPG).

Use Recommendations

Use at 5% v/v with either mono ethylene glycol (MEG) or mono propylene glycol (MPG) to produce high performance coolants. Ideal for closed loop systems and cooling systems where nitrites & nitrates are desired.

Safety Phrase

Refer Label, TDS or SDS

The post Corrogard Concentrate – Corrosion Inhibitor appeared first on Able Westchem.

Hook Oil Solvent

Able Westchem — Wed, 13 Oct 2021 12:41:08 +0000

HOOK OIL SOLVENT is a low residue lubricant with corrosion inhibitor for premium asset rust protection & ease of cleaning. Used in the meat processing industry for corrosion prevention on hooks gambrels, following the cleaning cycle. Low aromatic carbon content so formulation is non-flammable.

Use Recommendations

Use as received. Dip dry hooks and gambrels into product and remove. Allow articles to drain before reuse. Use as per technical advice specific to industry only.

Safety Phrase

Refer Label, TDS or SDS

The post Hook Oil Solvent appeared first on Able Westchem.