Typical Applications

• Petroleum coke residue removal from ship cargo holds
• Coal, carbon dust and black-stain removal
• Mineral deposit and heavy industrial soil removal
• Preparation of cargo holds between bulk cargoes
• Mould, fungi and algae removal from compatible surfaces
• Foam, pressure-spray, brush, mop, soak or sponge cleaning

Key Benefits

• Industrial-strength, fast-acting formulation
• Foaming action increases contact time on vertical surfaces
• Effective against stubborn pet coke and carbon staining
• Concentrated and adjustable for light or heavy contamination
• Hard-water tolerant
• Australian made and owned

For professional industrial and marine use only. This product is corrosive Class 8 Dangerous Goods and can release toxic gas if mixed with acids. Never mix with acidic cleaners. Use in accordance with the Safety Data Sheet and approved site procedures.

Use Recommendations

The post PET COKE HOLD CLEANER appeared first on Able Westchem.

Use Recommendations

• Automatic floor scrubbing machines
• Commercial and industrial floor cleaning
• Warehouses, workshops and production areas
• Maintenance cleaning of hard floor surfaces
• Removal of grease, dirt and ground-in soil

Typical use rate is 20 mL per litre of water (1:50). For light maintenance cleaning use approximately 10 mL/L, increasing up to 40 mL/L for heavy or ground-in soil.

Safety Phrase

The post TURBO – Floor Scrubber Cleaner appeared first on Able Westchem.

Use Recommendations

Use neat, or diluted with up to 10 parts of potable water.

Typical dilution rate is 1 part of ACID CLEAN to 5 parts of water; this solution can be diluted further or strengthened according to the extent of the contamination.

For best results wash the surface to be cleaned with appropriate cleaner (i.e. truck wash or water based degreaser) to remove any dirt, debris, oil or road film. Once the surface is clean of dirt and damp, simply swab surface, working from the bottom upwards with the solution of ACID CLEAN. Allow the solution time to dwell & work.

This product works via chemical reaction which takes time; allow at least 10 to 20 minutes. Do not all the surface to dry out, keep it wet evenly with the product until clean.

Once clean flush with copious amounts of fresh water. Some stubborn build-ups may require repeat applications; simply follow the steps above again.

If you are using this product to remove bore stains on brickwork or masonry ensure that the brickwork is saturated with water prior to use so the brickwork can “drink” as much water as it can because when it comes time to apply the ACID CLEAN we do not want it being sucked into the brickwork to be wasted and cause complications such as leaching or staining.

Safety Phrase

Refer Label, TDS or SDS

Does this product contain hydrofluoric acid?

No, this product was designed to remove red dust without HF or HCL which are being banned on many worksites.

Is there a stronger product available?

Yes, try AC580 as this is AC506 with the addition of just under 1% HF which is the maximum amount of HF allowable without a Poisons License. If you have a poisons license you can try AC518X which contains just under 10% hydrofluoric acid.

Do able make a thickened Acid Cleaner?

Yes, try Scaleaway

The post Acid Clean – AC506 appeared first on Able Westchem.

Use Recommendations

ACID DETERGENT AC580 may be used neat, or diluted with up to 10 parts of water. We recommend a dilution rate of 1 part of ACID DETERGENT AC580 to 5 parts of water initially; this solution can be diluted further or strengthened according to the extent of the contamination. Swab surface, working from the bottom upwards and keep wet evenly until clean. Flush with fresh water. Ensure that the surface is uniformly covered as uneven application may produce streaking.

Safety Phrase

Refer Label, TDS or SDS

Can this product remove red dust stains from paintwork on my vehicle?

Yes, AC580 can remove red dust stains safely from vehicle paintwork.

Red dust has stained the inside of my vehicles; can you use the acid detergent on carpets and plastic in the interior?

Yes, AC580 can be used on the inside of cars to remove red dust stains (we suggest starting with a very weak concentration and doing a test patch). Consult your reseller for more details.

What sort of damage can the Hydrofluoric Acid do to me at the concentration?

This product should be handled with care, especially when decanting. It contains less than 1% of HF which is only at an irritant level, however there are other acids in the product too that can cause burns if handled incorrectly.

The post Acid Detergent – AC580 appeared first on Able Westchem.

Use Recommendations

Apply neat or diluted via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method.

• Carpet spotting dilute 1:1
• Motor degreasing dilute 1:1
• Vehicle exterior washing dilute 1:20
• Floor Cleaning dilute 1:50
• Vinyl Cleaner dilute 1:20
• Upholstery dilute 1:25
• Spray & Wipe 1:25 to 1:50

* We are transitioning this product to a blue colour by removing the yellow dye

Safety Phrase

Refer Label, TDS or SDS

Why is this product so good at a lot of applications?

Active plus is a blend of detergents and solvents which give this product a wider range of uses

Is Active Plus okay to use in a food areas

Yes, providing the product does not come in direct contact with food. Always flush surface once cleaned with copious amounts of water.

The post Active Plus – Sugar Soap appeared first on Able Westchem.

Use Recommendations

BIN BATH doesn’t contain harsh alkalis or solvents and is safe to use on all washable surfaces.

Safety Phrase

Refer Label, TDS or SDS

The post Bin Bath – Cleaner & Insect Repellent appeared first on Able Westchem.

Use Recommendations

For removing detergent stains, grime and car washing build-up from wash bay walls the recommended dilution is 1 part chemical to 1 part cold water (ie 50:50).

To use, simply apply the diluted liquid to the wall, working from the bottom upwards.

Once the wall is covered evenly with the product allow roughly 3 minutes dwell time for the product to penetrate and then blast off with high pressure washer.

This product may be diluted up to 4 parts of water and repeat applications may be necessary if grime is ingrained deeply. NOTE: This product is corrosive to some metals, glass and other material containing silica. Prolonged contact with such materials may etch.

Safety Phrase

Refer Label, TDS or SDS

The post Clean Wall – AC509 appeared first on Able Westchem.

Use Recommendations

REFRIGERATION CONTAINERS:

KITCHENS:

BATHROOMS:

ALGAE AND SLIME REMOVAL:

LAUNDRY:

Safety Phrase

The post Comet – Foaming Cleaner Sanitiser appeared first on Able Westchem.

Use Recommendations

FLOOR & PRESSURE CLEANING:

1. Use up to 30 mls of EXTRA per litre of water.Apply by mop, foam unit, auto scrubber or pressure unit.
2. Allow 1 to 2 minutes to work, agitate then rinse thoroughly with water.
3. Note: this product is super strong so to avoid misuse or damage we recommend use by professionals only.

OVEN & GRILL CLEANING:

1. Heat oven or hotplate to 90%C then turn off.
2. Apply neat or diluted product (120ml per 750ml spray bottle).
3. Let stand for 2 to 5 minutes to break down heat modified soils then simply wipe clean with a damp cloth or scouring pad. Be sure to rinse surface with plenty of clean water or a weak vinegar and water solution to neutralize.

NOTE: Consider using dispensers to dilute and foaming trigger sprays on spray bottles to minimise aerosol inhalation and to generate foam to cling to vertical surfaces for easy cleaning. Avoid using this product on painted surfaces, aluminum, tin, copper, or galvanised materials. Using Extra with hot water achieves better and quicker results with less chemical. This product is compatible with bleach or Sodium Hypochlorite at use concentrations. NEVER mix bleach into or Extra directly, mix Extra into water then add bleach.

• UN No: 1814 CLASS: 8
• HAZCHEM: 2R PG: II
• Potassium Hydroxide Solution

Safety Phrase

Refer Label, TDS or SDS

The post Extra – Supa Alkaline appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Foamsan – Cleaner Sanitizer Food & Refrigerant appeared first on Able Westchem.

Use Recommendations

REFRIGERATION CONTAINERS:

Use from 1 part product to 20 parts water or as required dilution rates to remove different types of mineral and animal based soils.

KITCHENS:

For tables, cutting boards, bench-tops, tiled and stone floors, wash with FOAM CHLOR at 1:50 dilution. Leave for 5 – 10 minutes then rinse.

BATHROOMS:

FOAM CHLOR may be used to clean mould, soap scum, etc. from shower recesses and surrounding areas. Apply at 1:20 dilutions to the surface, leave for 5 minutes then rinse clean, using a brush if necessary. Ensure adequate ventilation in confined areas.

ALGAE AND SLIME REMOVAL:

For removing algae and mould from concrete, mortar and roof tiles, use 1 part FOAM CHLOR per 20 parts of water. Apply liberally to the surface and leave for at least 30 minutes. Brush off dead algae and hose with water.

LAUNDRY:

For bleaching, white clothes, immerse in a 1:500 solution of FOAM CHLOR (2ml per litre). Soak for 2 – 3 hours or overnight, then rinse then wash.

For baby nappies, remove soils matter and soak for 2 hours in FOAM CHLOR at 1:100 dilutions. Rinse, then wash. SAFETY Store in a cool dark place.

Do not mix with acids or other chemicals. This product is highly alkaline. Avoid contact with skin and eyes.

FOAM CHLOR is safe to use at the recommended dilution rates.

Safety Phrase

Refer Label, TDS or SDS

The post Foam Chlor – Chlorine Sanitiser appeared first on Able Westchem.

Use Recommendations

In all household, commercial and institutional areas for stain, grease and dirt removal including bathrooms, toilets, ablution blocks, showers, sinks and food preparation area. Hijax will effectively remove stains and discolourations from porcelain, stainless steel, cutting boards, copper, brass, aluminium, tiles and concrete floors. Ideal for cleaning of grills and ovens (including combi ovens).

HIJAX should be sprinkled via a shaker bottle provided over a wetted surface, and scoured with a cloth, sponge or brush until the surface is clean. Rinse thoroughly afterwards with clean water.

Safety Phrase

Refer Label, TDS or SDS

The post Hijax – Detergent Bleach Powder appeared first on Able Westchem.