The post Alcohol 70% – Sanitiser appeared first on Able Westchem.

Use Recommendations

BUBBLE GUM is designed for use in cars, hotels, motels, hospitals, homes, restaurants, clubs, schools and industrial areas. It can be used for hand wiping, mopping and deodorising applications on a wide variety of surfaces such as floors, walls, ceilings, painted and varnished surfaces, metal and plastic surfaces, washrooms, toilets etc.

For normal cleaning and disinfecting duties dilute 10 ml of BUBBLE GUM per litre of water. (This concentration may be increased for extra heavy soil). Mop, swab, wipe or spray this solution into surfaces. For food contact surfaces rinse with potable water afterwards.

Safety Phrase

Refer Label, TDS or SDS

The post Bubble Gum – Cleaner & Disinfectant appeared first on Able Westchem.

Use Recommendations

For normal cleaning and disinfecting duties dilute 10 ml of FRESH PINE per litre of water. (This concentration may be increased for extra heavy soil). Mop, swab, wipe or spray this solution into surfaces. For food contact surfaces rinse with potable water afterwards.

Safety Phrase

Refer Label, TDS or SDS

The post Fresh Pine – Cleaner Disnifectant appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Oxy 50 – Hydrogen Peroxide 50% Soln – Food Grade appeared first on Able Westchem.

Use Recommendations

Rinse surface to be sanitised & cleaned with potable water, then dissolve SANOCHLOR in cold to warm water. Just 3 grams of SANOCHLOR per litre of water provides 100 parts per million of available chlorine. The typical dosage is 1 cup per 20 litres. This solution may be swabbed or sponged onto surfaces or used for soaking. Rinse the surface clean with water. If residue remains in lines flush with 2% citric acid solution to neutralise, then flush again with water. Your lines, equipment and surfaces are now sanitised and destained.

Safety Phrase

Refer Label, TDS or SDS

The post Sanochlor Powder – Bactericide Cleaner appeared first on Able Westchem.

Use Recommendations

SANOPINE is designed for use in schools, hotels and motels, homes, restaurants, clubs and industrial areas. It can be used for hand wiping, mopping and reodorising applications on a wide variety of surfaces such as floors, walls, ceilings, painted and varnished surfaces, metal and plastic surfaces, washrooms, toilets etc.

For normal cleaning and disinfecting duties dilute 10 ml of SANOPINE per litre of water. (This concentration may be increased for extra heavy soil). Mop, swab, wipe or spray this solution into surfaces. For food contact surfaces rinse with potable water afterwards.

Safety Phrase

Refer Label, TDS or SDS

The post Sanopine – Cleaner Disinfectant appeared first on Able Westchem.

Use Recommendations

SANOLEMON is designed for use in schools, hotels, motels, homes, restaurants, clubs and industrial areas. It can be used for hand wiping, mopping and reodorising applications on a wide variety of surfaces such as floors, walls, ceilings, painted and varnished surfaces, metal and plastic surfaces, washrooms, toilets etc.

For normal cleaning and disinfecting duties dilute 10 ml of SANOLEMON per litre of water. (This concentration may be increased for extra heavy soil). Mop, swab, wipe or spray this solution into surfaces. For food contact surfaces rinse with potable water afterwards.

Safety Phrase

Refer Label, TDS or SDS

The post Sanolemon – Cleaner Disinfectant appeared first on Able Westchem.

Use Recommendations

Apply STAIN OFF directly onto the stained area. Most stains may be wiped off immediately but for older stains, allow a few minutes for STAIN OFF to act. An effective method for really stubborn stains is to dampen a clean cloth with STAIN OFF and place it on the stain for 15-20 minutes. Wipe off afterwards.

STAIN OFF may also be used on carpets but should be tested first on a small inconspicuous area to ensure colour fastness.

Refer Label, TDS or SDS

The post Stain Off – Iodine and Medical Dye Stain Remover appeared first on Able Westchem.

Use Recommendations

Dissolve TRISOL in cold to warm water. Just 3 grams of TRISOL per litre of water provides 100 parts per million of available chlorine. This solution may be swabbed or sponged onto surfaces or used for soaking. Rinse food contact surfaces with potable water after use.

Safety Phrase

Refer Label, TDS or SDS

The post Trisol Powder – Sanitiser Cleaner appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Zone Fresh – Disinfectant Deoderising Cleaner appeared first on Able Westchem.