Hot Wash Chemicals | Order Hot Wash Chemicals in Bulk

Alkaline Decarboniser Powder

Able Westchem — Wed, 13 Oct 2021 12:41:54 +0000

ALKALINE DECARBONISER POWDER is an off-white, heavy duty powder concentrate formulated to remove carbon, oils, fats, greases, paint and other obstinate soils from stainless steel, ferrous metals, fibre reinforced plastic, EPD, LDPE, HDPE AND copper. Use via soak tank method.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

Packaging

The post Alkaline Decarboniser Powder appeared first on Able Westchem.

Alkaline Cleaning Powder

Able Westchem — Wed, 13 Oct 2021 12:41:54 +0000

ALKALINE CLEANING POWDER is an off-white powder with a pine odour and is formulated to remove paint, carbon, oils, grease and other obstinate soils from copper and ferrous metal. Use via soak tank method.

Use Recommendations

ALKALINE CLEANING POWDER should be mixed slowly into cold water. Agitate to make sure all product is thoroughly dissolved. The bath should be constructed of mild steel and have a drain at the bottom of the tank to make dislodging and draining easier. Alloys and amphoteric metals cannot be used in this bath as they will react and seriously impair the solution performance. ALKALINE CLEANING POWDER should be used at 100gms per litre of water at 80°C if possible. Parts should be immersed the solution and agitated if an agitator is fitted to the bath. Parts should be rinsed with water to flush away residual product after removing from the bath. Use 100 to 200gms of the product to a litre of water if a cold and still bath is necessary. NOTE: Plan the bath to completely immerse the parts that need cleaning. The bath can be used repeatedly until it is completely attenuated.

Safety Phrase

Refer Label, TDS or SDS

The post Alkaline Cleaning Powder appeared first on Able Westchem.

Biocide BS

Able Westchem — Wed, 13 Oct 2021 12:41:46 +0000

BIOCIDE BS is a high performance broad spectrum isothiazoline biocide for the chemical control of a wide variety of algae, bacteria (including Sulphate reducing bacteria) and fungi commonly found in water and glycol process systems, Cooling Towers and storage tanks.

Biocide BS is a versatile product ideal for:

Controlling slimes, odours, moulds and biological growth in cutting fluids and processing aids.
As an additive in paints and antifoulants for control of mildew, mould and fungus.
An effective bilge treatment to control marine plant and animal life such as algae, hydroids and barnacles.

Use Recommendations

BIOCIDE BS is effective at very low concentrations of 12 ppm active ingredient in the control of algae, bacteria and fungi. Recommendations are based with out knowledge of individual water contaminates.

Slug Dosing Recommendations:

When the system is noticeably fouled:

20 to 70ppm for every 4000 Litres.
Repeat until microbial control.

Intermittent Maintenance Dosing Recommendations:

After establishing microbial control: 13.5 to 80 ppm.
Dose 2 to 3 times per week based on microbial control.
Sulphate Reducing Bacteria control between 45 to 85 ppm.

Safety Phrase

Refer Label, TDS or SDS

The post Biocide BS appeared first on Able Westchem.

Spin Bath Powder – Part Washer Powder

Able Westchem — Wed, 13 Oct 2021 12:40:27 +0000

SPIN BATH POWDER is a non-caustic part washing powder for use on ferrous and non ferrous metals. Suitable for use in both manual or cabinet parts washers. This product contains an in-built corrosion inhibitor to help prevent flash rusting and anti-foam to prevent foam buildup.

Use Recommendations

For Automated spin washers use 10gm per litre of water. For Soak Baths use 1kg per 20 Litres of water. Ensure you mix in thoroughly, dissolving powder. Generally suitable for most parts washers, (such as Robowash) when no longer under contract.

Safety Phrase

Refer Label, TDS or SDS

The post Spin Bath Powder – Part Washer Powder appeared first on Able Westchem.