Parts Washer Chemicals | Order Parts Washer Chemicals in Bulk

Able Ecosoak

Able Westchem — Wed, 13 Oct 2021 12:42:03 +0000

ABLE ECOSOAK & STRIP requires no special heating or agitation and works like magic. For use in a SOAK BATH operation. It is a NON DANGEROUS, low VOC, industrial strength ENVIRONMENTALLY RESPONSIBLE soak tank paint stripper that effectively removes high performance, architectural & industrial paints & surface coatings. ABLE ECOSOAK & STRIP will successfully remove multiple coats of most oil-based coatings, water-based coatings, varnishes, acrylics, urethanes, polyurethanes, epoxies, inorganic zincs, elastomeric coatings and specialty marine coatings. This product is considered safe for use on most surfaces such as wood, brick, stone, concrete and metals.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

The post Able Ecosoak appeared first on Able Westchem.

Solvent R55

Able Westchem — Wed, 13 Oct 2021 12:42:02 +0000

ABLE SOLVENT R55 is a hydrocarbon solvent. This product is for general industry use and is particularly ideal for cleaning rubber (i.e. tyres), auotomotive parts cleaner, grease, workshop cleaner, removing adhesives and pre-cleaner prior to spray painting.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

The post Solvent R55 appeared first on Able Westchem.

Alkaline Cleaning Powder

Able Westchem — Wed, 13 Oct 2021 12:41:54 +0000

ALKALINE CLEANING POWDER is an off-white powder with a pine odour and is formulated to remove paint, carbon, oils, grease and other obstinate soils from copper and ferrous metal. Use via soak tank method.

Use Recommendations

ALKALINE CLEANING POWDER should be mixed slowly into cold water. Agitate to make sure all product is thoroughly dissolved. The bath should be constructed of mild steel and have a drain at the bottom of the tank to make dislodging and draining easier. Alloys and amphoteric metals cannot be used in this bath as they will react and seriously impair the solution performance. ALKALINE CLEANING POWDER should be used at 100gms per litre of water at 80°C if possible. Parts should be immersed the solution and agitated if an agitator is fitted to the bath. Parts should be rinsed with water to flush away residual product after removing from the bath. Use 100 to 200gms of the product to a litre of water if a cold and still bath is necessary. NOTE: Plan the bath to completely immerse the parts that need cleaning. The bath can be used repeatedly until it is completely attenuated.

Safety Phrase

Refer Label, TDS or SDS

The post Alkaline Cleaning Powder appeared first on Able Westchem.

Alkaline Decarboniser Powder

Able Westchem — Wed, 13 Oct 2021 12:41:54 +0000

ALKALINE DECARBONISER POWDER is an off-white, heavy duty powder concentrate formulated to remove carbon, oils, fats, greases, paint and other obstinate soils from stainless steel, ferrous metals, fibre reinforced plastic, EPD, LDPE, HDPE AND copper. Use via soak tank method.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

Packaging

The post Alkaline Decarboniser Powder appeared first on Able Westchem.

Brake & Gasket Gunwash Cleaner

Able Westchem — Wed, 13 Oct 2021 12:41:45 +0000

BRAKE GASKET & GUNWASH CLEANER can be used on cleaning brakes, spray lines and spray guns. It can also be used to remove glue, brake dust, grease, rubber, resin, oil, paint, graffiti and burnout marks.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

The post Brake & Gasket Gunwash Cleaner appeared first on Able Westchem.

Spin Bath Powder – Part Washer Powder

Able Westchem — Wed, 13 Oct 2021 12:40:27 +0000

SPIN BATH POWDER is a non-caustic part washing powder for use on ferrous and non ferrous metals. Suitable for use in both manual or cabinet parts washers. This product contains an in-built corrosion inhibitor to help prevent flash rusting and anti-foam to prevent foam buildup.

Use Recommendations

For Automated spin washers use 10gm per litre of water. For Soak Baths use 1kg per 20 Litres of water. Ensure you mix in thoroughly, dissolving powder. Generally suitable for most parts washers, (such as Robowash) when no longer under contract.

Safety Phrase

Refer Label, TDS or SDS

The post Spin Bath Powder – Part Washer Powder appeared first on Able Westchem.