Use Recommendations

• Automatic floor scrubbing machines
• Commercial and industrial floor cleaning
• Warehouses, workshops and production areas
• Maintenance cleaning of hard floor surfaces
• Removal of grease, dirt and ground-in soil

Typical use rate is 20 mL per litre of water (1:50). For light maintenance cleaning use approximately 10 mL/L, increasing up to 40 mL/L for heavy or ground-in soil.

Safety Phrase

The post TURBO – Floor Scrubber Cleaner appeared first on Able Westchem.

Use Recommendations

Use as required. Ensure correct PPE is worn.

Safety Phrase

Refer Label, TDS or SDS

The post Solvent R55 appeared first on Able Westchem.

Use Recommendations

Apply neat or diluted via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method.

• Carpet spotting dilute 1:1
• Motor degreasing dilute 1:1
• Vehicle exterior washing dilute 1:20
• Floor Cleaning dilute 1:50
• Vinyl Cleaner dilute 1:20
• Upholstery dilute 1:25
• Spray & Wipe 1:25 to 1:50

* We are transitioning this product to a blue colour by removing the yellow dye

Safety Phrase

Refer Label, TDS or SDS

Why is this product so good at a lot of applications?

Active plus is a blend of detergents and solvents which give this product a wider range of uses

Is Active Plus okay to use in a food areas

Yes, providing the product does not come in direct contact with food. Always flush surface once cleaned with copious amounts of water.

The post Active Plus – Sugar Soap appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Brake & Gasket Gunwash Cleaner appeared first on Able Westchem.

• ECO BREAK is available in large commercial bulk quantities.

Use Recommendations

• Light Duty Cleaning 200ml per 10L of water
• Medium Duty Cleaning 500mL per 10 litres of water
• Heavy Duty Cleaning 1:1 or Neat
• Bond Break Cleaner: Neat or 1:1 with water

Safety Phrase

The post Eco Break – Quick Break Degreaser & Sanitiser appeared first on Able Westchem.

Use Recommendations

ECOSAN is safe on most surfaces not harmed by water alone; use ECOSAN with confidence on trucks, tankers, rigs, platforms, engines, plastics, steel, aluminium, painted surfaces, concrete and glass.

Apply ECOSAN by hand, ventures, positive displacement pumps, high pressure cleaners, foaming units, mop and bucket, or spray directly onto surfaces using trigger sprays or pressure packs.

DEGREASING:

1. se as received or dilute 50/50 with warm water.
2. Spray or brush onto contaminated surface.
3. Allow two minutes soak time.
4. Depending on soil contamination, some surfaces may require agitation prior to flushing or blasting off with water.
5. For best results use hot or warm water to flush.

ENERAL HARD SURFACE CLEANING:

ECOSAN is versatile and may be used at dilutions ranging from 1:10 for extra heavy deposits and spot cleaning, to 1:100 for light duty cleaning applications. Use on cars, rigs, floor, benches etc

DISINFECTING & ODOUR:

Use ECOSAN at a solution no weaker than 1:100 which is suitable for light duty disinfecting & cleaning of floors, wall, tiles etc. For extra heavy deposits and spot disinfecting use 1:10 with water.

SOAK CLEANING:

1. Use at rate of 1:20 with water.
2. Immerse equipment in the solution, scrub with brush and rinse.
3. Use a spray gun for spot cleaning or machine and or mop and bucket for floor cleaning.
4. Always follow with a clean water rinse.

Safety Phrase

Refer Label, TDS or SDS

The post Ecosan – Cleaner & Degreaser appeared first on Able Westchem.

Use Recommendations

Use as you would use a solvent cleaner. Apply to electrically isolated equipment that is at room temperature. Apply via spray pack, immersion/dipping tank or any other safe method and allow. The soil should dissolve into solution and be rinsed away by product. After cleaning allow components to air dry for maximum non – conductivity.

Safety Phrase

Refer Label, TDS or SDS

The post Electrical Safety Solvent appeared first on Able Westchem.

Use Recommendations

FLEET CLEAN GREEN can safely & efficiently remove road film, grease, oils, grime, wax, carbon deposits, ink dyes, gum, pencil, crayon marks, animal fats, vegetable soils and soap residues.  FLEET CLEAN GREEN is suitable to use on most metal, glass, wood, vinyl, washable painted surfaces and plastics and is compatible with most carwash & foaming systems.

General Cleaning:

FLEET CLEAN GREEN can be foamed or brushed on at dilution ratios ranging from 1:10 to 1:100. For best results and improved economy use hot water with agitation.

Degreasing:

Apply neat with squirt bottle or paint brush. Allow 2 minutes to work then agitate and flush with water. For best results warm engine or object before degreasing.

Safety Phrase

Refer Label, TDS or SDS

The post Fleet Clean Green – Degreaser appeared first on Able Westchem.

Use Recommendations

Apply neat or diluted via a spray bottle, foam gun, pressure cleaner, cloth, sponge, brush, mop or soak method.

Dilution Recommendations with Water:

• Kitchen Degreasing 1:1 to 1:4
• Foam Cleaning 1:20 to 1:100
• Floor Cleaning 1:20 to 1:200
• Spray & Wipe Cleaning 1:20 to 1:200
• Pots & Pans
• Cool Rooms & Freezers 1:20 (with 10% Propylene Glycol if required)
• NOTE: Always rinse surfaces clean with potable water after cleaning with this product.

Safety Phrase

Refer Label, TDS or SDS

The post Hercules – HD Food Area Detergent appeared first on Able Westchem.

Use Recommendations

Safety Phrase

The post Solvent Degreaser Orange – Heavy Duty appeared first on Able Westchem.

Use Recommendations

MARINER is designed for use as a hold & bilge cleaner. Also recommended for general cleaning and sanitising of rigs, ships, vessels, slipways, food processing and abattoir equipment, weathered aluminium truck bodies, engine and equipment degreasing.

MARINER is suitable for use with all types of mechanical cleaning and spraying equipment.

• For Heavy Duty Degreasing, neat or up to 1 part to 4 parts water.
• For Normal Duty Disinfecting Cleaning, up to 1 part of MARINER to 50 parts water.
• When used in food establishments, rinse away all residues with potable water.
• Safe on most painted surfaces however we recommend performing a small test patch first.

CAUTION: Not recommended for use on Aluminium unless diluted.

Safety Phrase

Refer Label, TDS or SDS

The post Mariner – Degreaser Sanitiser appeared first on Able Westchem.

Use Recommendations

General Cleaning:

• MULTI-SAFE should be used at 30ml per litre of water.
• For heavy soils use 50/60ml per litre of water.
• For best results use hot water with agitation.

Degreasing:

• Apply neat with squirt bottle or paint brush.
• Allow 2 minutes to work then agitate and flush with water.
• For best results warm engine or object before degreasing.
• Product is compatible with most interceptors (ie MULTI-SAFE will break)

Safety Phrase

Refer Label, TDS or SDS

The post Multi-Safe appeared first on Able Westchem.