Hook & Gambrel Chemicals | Order Hook & Gambrel Chemicals in Bulk

Hook & CIP Cleaner

Able Westchem — Wed, 13 Oct 2021 12:41:08 +0000

HOOK & CIP CLEANER is a high alkaline surfactant based concentrate used for the efficient stripping of fats, protein, carbon, and miscellaneous organic build-up from steel and plastic in food processing areas.

Use Recommendations

SOAK OR DIP TANKS (Hooks & Gambrels)

Dilute: At the ratio of 1 part product to 10 parts water in soak bath.
Can be used in cold bath but overall performs will be better if the bath is heated to 70-80C.
TIP: As the contamination within the bath increases extra product will need to be periodically added to offset fat build-up.
Excessive contamination will require a complete change of dilution bath.Once surface is clean flush clean with copious amounts of potable water.

SMOKE HOUSES

Spray, Foam, Circulate or Brush on with hot water at ratio of 2% to 8% v/v. Agitate and allow 5 to 10 minutes dwell time. Once surface is clean flush clean with copious amounts of potable water.

Safety Phrase

Refer Label, TDS or SDS

The post Hook & CIP Cleaner appeared first on Able Westchem.

Hook Oil Solvent

Able Westchem — Wed, 13 Oct 2021 12:41:08 +0000

HOOK OIL SOLVENT is a low residue lubricant with corrosion inhibitor for premium asset rust protection & ease of cleaning. Used in the meat processing industry for corrosion prevention on hooks gambrels, following the cleaning cycle. Low aromatic carbon content so formulation is non-flammable.

Use Recommendations

Use as received. Dip dry hooks and gambrels into product and remove. Allow articles to drain before reuse. Use as per technical advice specific to industry only.

Safety Phrase

Refer Label, TDS or SDS

The post Hook Oil Solvent appeared first on Able Westchem.

Phosclean Detergent

Able Westchem — Wed, 13 Oct 2021 12:40:47 +0000

PHOSCLEAN DETERGENT is a commercial use, heavy-duty solution of phosphoric acid plus low foaming surfactants. It is commonly used to cut residue, fallout and buildup from beer-lines, tanks, vats and equipment in to solution for efficient removal. Further, it is specially designed to remove rust stains from paint, fiberglass, metal and most plastics.

Use Recommendations

PHOSCLEAN DETERGENT is very versatile & can be used in spray, circulation, soak, brush or hand wipe applications to remove hard water scales like calcium & carbonates if used on a regular basis.

SITUATIONS TO AVOID IN USE

Avoid contact with Sodium Hypochlorite solutions (bleach), colorbond, anti-fouling paint, marble, anodised or galvanised surfaces & aluminium. Always pre test an inconspicuous test area before tackling your job.

Safety Phrase

Refer Label, TDS or SDS

The post Phosclean Detergent appeared first on Able Westchem.

Soliguard

Able Westchem — Wed, 13 Oct 2021 12:40:29 +0000

SOLIGUARD is corrosion prevention and lubrication used in the food industry for on hooks & roller and machinery following the cleaning cycle.

Use Recommendations

Use & Dilution Recommendations:

ABATTOIRS – HOOKS & ROLLERS:

Use in last soak tank of the Hook cleaning process. Use neat in ambient bath or diluted to 10% to 20% solution in heated and pH-controlled bath according to your lubrication requirements or Technical Advice. Immerse clean hooks & rollers for 30 seconds, agitate and remove from dip tank & allow articles to drain & dry before reuse.

WORKSHOPS:

Use neat or diluted at ~20% with potable water on parts after degreasing & cleaning. Apply via spray, dip or swab method. Allow parts to drain & air-dry before handling, packing or storage. Rust-free storage for not less than 90 days under typical conditions.

LUBE OIL – Dilute 2 parts SOLIGUARD with 1-part HOT Water and mix well at high speed. Then add 1-part Cold water and mix well. Use as received and as required.

Safety Phrase

Use as required. Ensure correct PPE is worn.

Packaging

Refer Label, TDS or SDS

The post Soliguard appeared first on Able Westchem.