A direct replacement for GAMAZYME 700FN

Use Recommendations

Broadcast a small amount of MARAZYME SHOCK POWDER on to the surface of the ponds or tanks to cover the surface area. Most users treat ponds or tanks daily at a rate sufficient to cover surface with light coating.  The required dosage & frequency of application for an efficient treatment varies depending on volume, surface area, flow rate and temperature.  Regular treating is better than infrequent treating for optimum performance.  Consider also using slow release tablets for treating over weekends or holidays.

For grease traps the tanks must be recently cleaned or serviced to achieve the best results. Broadcast powder into empty tanks then use as normal and dose weekly or as required.  Use as per the technical advice specific to industry only.

Safety Phrase

Refer Label, TDS or SDS

The post Marazyme Shock Powder appeared first on Able Westchem.

Use Recommendations

For regular scale control in high scale environments such as ships and mine sites add 50 grams (one scoop supplied with 5KG bucket) to the toilet bowl at least once a fortnight depending on water quality. Allow product to dissolve and stand for a minute or two, scrub/brush the bowl and then flush with water. Repeat this action if required.

URINALS:

Sprinkle product around the grate and effected areas, allow dissolving then scrubbing/brushing and flushing with water.

DRAINS, PIPE WORK & GREASE TRAPS:

If scale formation in these locations occur you may find run off/discharge from toilets, sinks and showers become very slow. Add 100-150grams of product to the effected locations and allow dissolving. Contact time is important so leave stand for a minute or two before scrubbing/brushing and then flushing with water.

WASHROOMS AND SHOWERS:

Add 50-100grams of product to a 10 litre container of hot water. Allow to dissolve and use the solution to scrub the effected surface areas then rinse with water.

STAINLESS STEEL:

Add 150-300 grams of product 10 litre container of hot water into a container or auto parts washer. Immerse item in the solution and allow time to work (15 minutes) before flushing clean with water.

Safety Phrase

Refer Label, TDS or SDS

The post Marazyme Descaler appeared first on Able Westchem.

Use Recommendations

Septic Systems / AWTS / Absorption Trenches:

• Add an initial prime of 4lt of MARAZYME BTC per septic tank via TOILETS AND DRAINS leading into the system.
• For systems with multiple tanks or tanks larger than 6,000lt consult your Technical representative for application rates.
• Continue with a maintenance program of 150ml of MARAZYME BTC per day per week.
• A minimum period of 3-4 months is required to restore absorption trenches.

Grease Traps:

• To maintain grease traps add 125ml of MARAZYME BTC per day via sink drains; follow with 1lt of water.
• For grease traps with high discharge or larger than 1,000lt consult your Technical representative for application rates.
• Allow sufficient time for drains to cool after final dishwasher use for the day.
• Avoid using harsh chemical including chlorines or caustic cleaners.
• Clean trap and line before using MARAZYME BTC.

Drains:

• Add 250ml of MARAZYME BTC mixed with 250ml of water to malodorous or blocked drains daily until cleared.
• For best result apply to drain and leave overnight.
• Avoid using harsh chemical chlorines or caustic cleaners.
• Clean regularly with MARAZYME BTC to keep clear.

Toilet, Washroom & General cleaning:

• Use as received daily as any normal toilet/urinal cleaner.
• Dilute 100ml MARAZYME BTC per 1lt water (1:10) for general cleaning of hard surfaces including ablutions block applications like, showers, sinks, basins, benches, walls and floors.
• Rinsing is recommended. For high pressure cleaning dilutions can be up to 1:50.
• DO NOT USE IN FOOD PREP AREAS WITHOUT RINSING AFTERWARD WITH POTABLE WATER.

Odour Control:

• Dilute 50ml MARAZYME BTC per 1lt water (1:20) to neutralize odour.
• Spray affected area liberally with MARAZYME BTC as required.
• Surfaces that are absorbent (e.g. wood, concrete) should be periodically washed with MARAZYME BTC to remove ingrained soils that produce and harbour the odour.

Effluent Ponds/ Lagoons:

• For initial conditioning of ponds in poor condition consult your Technical representative for application rates based on pond capacity and effluent flow.
• For maximum benefit MARAZYME BTC CONCENTRATED dilutions are required.
• A healthy and efficient pond requires 1lt of MARAZYME BTC per 20,000 lt of effluent flow.
• If pH fluctuates outside the range of pH 6.5 to pH 8.5 consult your Technical representative.

Landfills:

• Spray landfill sites daily with 1lt of MARAZYME BTC per 1,000 M2.

Refer Label, TDS or SDS

The post Marazyme BTC – Enzyme Cleaner appeared first on Able Westchem.