Gloss Seal

GLOSS SEAL is an all weather high solids acrylic polymer and solvent emulsion formulated to provide a long lasting and UV stabilised protective seals on most concrete, marine and sports court surfaces such as indoor basketball and netball courts.

Use Recommendations

NOTE: This product is highly flammable and should be used & stored away from ALL sources of flame or ignition.

Typical Concrete & Marine coverage is 5 m2 per litre per coat which translates to 1 x 20 litre bucket for every 50m2.

Prior to application of GLOSS SEAL it is recommended to thoroughly clean the surface using an approved Able Westchem detergent and allow overnight to dry.

GLOSS SEAL should only be applied to clean dry surface. For most applications two coats is normally sufficient leaving at least an hour between coats, however, some surfaces may require further coats to provide a higher gloss coating. GLOSS SEAL should normally be applied using a lambs wool applicator or roller, or good quality paintbrush. Spray applications are not recommended (unless used by a Professional) because of fire risk however this product is perfectly compatible with the spay method of application otherwise.

GLOSS SEAL should be stirred or shaken well before use and only be applied to surfaces with temperatures between 10 _ 30 degrees Celsius with moisture content between 0 -15%. A moisture meter is recommended to indicate curing conditions. Airflow is required to aid the drying process however too much air flow can cause the coating to dry too quickly.

For more specific advice please consult place of purchase or Able Westchem’s Technical Manager.

Safety Phrase

Refer Label, TDS or SDS