Penetrating Compound – Rust Breaker

PENETRATING COMPOUND is a strong penetrant product for breaking rusted beads on wheels, unfreezing seized parts, water displacer, lubricant and a flash rust preventer. This product is Non-toxic and very reliable.

Use Recommendations

BEAD BREAKING:

• Warning flammable product.
• Ensure product is used in a well-ventilated area and all sources of ignition are removed.
• Use the product strictly as received and do not dilute.
• In a sheltered cool area, lay tyre flat with bead facing upwards.
• Apply liberal amount of the compound evenly to the bead and allow to penetrate for 20 minutes.
• The volatile solvent should have evaporated after 15 minutes.
• The residue left behind after solvent has evaporated is non-flammable.
• If excess solvent remains (i.e. applied is cold weather) remove any excess with a dry rag or wash clean with water to be safe.
• Then demount the tyre as usual.

UNFREEZING PARTS: Warning flammable product. Do not apply to hot or electrically energised equipment or parts. Ground / earth your equipment first as static electricity can ignite the compound. Dip, paint or squirt the part to be unfreeze with the compound (i.e. rusty nuts & bolts). Allow the product to work for 5 to 10 minutes and then work the parts. This product with dissolve rust and disrupt the bonds between the rusted & frozen parts. The product will leave behind a film that will help to protect the parts from further rusting.

Safety Phrase

Refer Label, TDS or SDS